Sym RV 250i Service Manual page 88

Remove fuel pump/fuel unit
Remove side cover.
Remove rear carrier
Remove rear bodycover.
Remove floor panel.
Remove under cover.
(refer to chapter 14)
Remove fuel pump lines coupler.
Release the fuel tube folder, removed the fuel tube.
Remove the fuel tank fixed bolts (Bolt × 3), remove the
fuel tank.
Remove / Install fuel pump and fuel unit
Remove fuel pump
fixed bolts (Bolt × 6),
pump.
Install In the anti-demolition order.
Cautions
Then remove fuel pump, fuel in fuel tank
internal to confirm not excessive.
Then install fuel pump and fuel unit, attention
direction.
Confirm whether the fuel filter dirt,
obstructive.
Fuel pump installation, to confirm whether it
is normal to the fuel out (the pressure about 3
kg/cm2).
To this chapter contents
Bolt × 3
remove fuel
4. Fuel Injection System
Fuel pump
Pressure Regulating Valve
Fuel filter
4-39