Carburetor type and other common
Mechanical
Remove the power coupler of auto by-starter.
Remove the spark plug cap.
Remove the generator power wire and pulse
generator connector.
Remove the starter motor wire.
Remove engine blow-by pipe.
Remove the fuel line, vacuum hose, and throttle
valve cable from the carburetor.
Loosen the clamp strip of air cleaner and
carburetor, and then remove the air cleaner hose.
To this chapter contents
5
. Removal & Installation of Engine
Auto by-starter coupler
Engine blow-by pipe
Spark plug cap
Couplers of the generator and
pulse generator
Starter motor wire
Clamp strip
5-5