Sym RV 250i Service Manual page 110

Precautions in Operation···················· 5-1
Engine Removal ·································· 5-2
Engine Hanger ····································· 5-8
Precautions in Operation
General Information
Engine must be supported by a bracket or adjustable tool in height.
The following parts can be serviced with the engine installed on the frame.
1. Carburetor.
2. Driving disk, driving belt, clutch, and transporting disk.
3. Final reduction gear mechanism.
4. AC. Generator.
Specification
Item
Engine Oil Capacity
Gear Oil Capacity
Capacity of coolant
Torque Values
Engine hanger bolt (frame side)
Engine hanger nut (engine side)
Bolt of rear cushion upper connection
Bolt of rear cushion lower connection
Rear wheel axle nut
Home page
5
Replacement
Disassemble
Replacement
Disassemble
Engine + radiator
Reservoir upper
7.5~9.5kgf-m
7.5~9.5kgf-m
3.5~4.5kgf-m
2.4~3.0kgf-m
11.0~13.0kgf-m
Contents
. Removal & Installation of Engine
Rear Fork ·············································· 5-9
Engine Bush Removal ························· 5-11
Engine Installation ······························· 5-12
LM25W5-6/7/P
LM25W7-7
LM30W-6/T
1,200 c.c.
1,400 c.c.
160 c.c.
180 c.c.
850 c.c.
420 c.c.
5
5-1