Gear Oil - Sym RV 250i Service Manual

To this chapter contents
3. Lubrication System
G ear Oil
Gear oil join bolt
6 B
Gear Oil Change
Remove oil join bolt.
Remove drain bolt and drain gear oil out.
Install the drain bolt after drained.
Torque value: 1.1~1.5kgf-m
Make sure that the drain bolt washer can be
re-used.
Add oil to specified quantity from the join hole.
Gear Oil Quantity: 160c.c. when replacing
Gear oil drain bolt
Make sure that the join bolt washer can be re-used,
and install the bolt.
Torque value: 1.0~1.4kgf-m
Start engine and run engine for 2-3 minutes.
Turn off engine and make sure that oil level is in
correct level.
Make sure that no oil leaking.
3-7