Setting The Ip Address Manually; Setting The Ip Address Automatically - Nortel BES50GE-12T PWR User Manual

Setting the IP address manually

Use the IP Configuration page to set the IP address manually.
Procedure steps
Step
1
2
3
4
5
6

Setting the IP address automatically

Use the IP Configuration page to set the IP address dynamically and to
request an IP address from the DHCP server.
Prerequisites
•
Procedure steps to set the IP address automatically
Step
1
2
3
4
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Configuration > IP.
Select the VLAN through which the management station is attached.
In the IP Address Mode box, select Static .
Type the IP address, subnet mask, and gateway IP address.
Click Submit.
To save the changes, close the Web-based user interface and start a
new session by using the new IP address.
To configure the switch dynamically, the network must provide DHCP
or BOOTP services.
Action
From the main menu, choose Configuration > IP.
Select the VLAN through which the management station is attached.
In the IP Address Mode box, select DHCP or BOOTP.
Click Submit to save the setting and get the new IP address from
the DHCP server.
The switch broadcasts a request for IP configuration settings on
each power reset.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
—End—
SMB
Setting the IP address 25
Nortel Networks Confidential