Configuring Lacp Parameters - Nortel BES50GE-12T PWR User Manual

Procedure steps
Step
1
2
3
Variable definitions
Variable
Member List (Current)
New
Configuring LACP parameters
Use the LACP Aggregation Port page to dynamically create port channels.
Ports assigned to a common port channel must meet the following criteria:
•
•
Procedure steps
Step
1
2
Copyright © 2006, Nortel Networks
.
Action
From the main menu, choose Configuration > Port > LACP >
Configuration.
Select a port.
Click Add.
Value
List of configured trunks (Port).
Includes entry fields for creating new trunks. (Ranges: 1 to 12 for
12-port switches, and 1-24 for 24-port switches.)
Ports must have the same LACP system priority.
Ports must have the same LACP port administration key.
However, if the port channel administration key is set, then the port
administration key must be set to the same value for a port to be allowed
to join a channel group.
If the port channel LACP administration key is not set when a channel
group is formed (if it has a null value of 0), this key is set to the same
value as the port administration key used by the interfaces that joined
the group.
Action
From the main menu, choose Configuration > Port > LACP >
Aggregation Port.
Type the System Priority, Admin Key, and Port Priority for each Port
Actor.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
—End—
SMB
Creating trunk groups 59
Nortel Networks Confidential