Bes50 Administration; Resetting The System - Nortel BES50GE-12T PWR User Manual

BES50 administration

Navigation
•
•
•
•
•
•

Resetting the system

Use this procedure to reset the factory defaults on the Business Ethernet
Switch (BES) 50.
Procedure steps
Step
1
2
3
4
5
Copyright © 2006, Nortel Networks
.
"Resetting the system" (page 95)
"Changing a PC IP address" (page 96)
"Displaying system and switch information" (page 97)
"Managing firmware" (page 115)
"Testing port cable connections" (page 117)
"Troubleshooting" (page 117)
Action
From the BES50 switch, to reboot the switch press the reset button
for at least 5 seconds.
The reset button is located inside the housing approximately 2.54 cm
(1 inch) from the faceplate. Use a nonmetallic object to press the reset
button at the location indicated on the front panel. See
PWR front panel" (page 127)
(page 127).
From the main menu, choose Administration > Reset.
To reboot the switch and maintain current settings, click Reset.
To reset the switch to factory default settings, click Factory Default.
From the Web-based user interface, confirm that you want to reset
the switch.
Using the Nortel Business Ethernet Switch 50 Series
NN47924-301 01.01 Standard
1.00 October 2006
ATTENTION
or "BES50FE/GE-24T PWR front panel"
SMB
95
"BES50FE/GE-12T
Nortel Networks Confidential