Table of Contents
Advertisement
4.2 - 30RQS 080-160, units with and without hydronic module
For units with fans with variable available pressure (30RQSY) please refer to the pages that follow.
legend:
All dimensions are given in mm
Control box
Water inlet
Water outlet
Required clearances for air flow
Recommended clearances for maintenance
Air outlet, do not obstruct
Power cable entry
Multiple unit installation
12
Solid wall
NOTES:
A
Non-certified drawings.
Refer to the certified dimensional drawings supplied with the unit or available
on request, when designing an installation.
For the location of fixing points, weight distribution and coordinates of the
centre of gravity refer to the certified dimensional drawings.
B
In multiple-unit installations (maximum four units), the side clearance between
the units should be increased from 1000 to 2000 mm.
C
The height of the solid surface must not exceed 2 m.
Solid wall
NOTE: If the walls are higher than 2 m, contact the factory
Hide quick links:
Advertisement
Table of Contents
