Using The Wireless Controller - Canon Elura 90 Instruction Manual

Using the Wireless Controller
Point it at the camcorder's remote
sensor when you press the buttons.
I.ns.ertingthe Battery
20
The wireless controller operates with a lithium button battery CR2025.
1. Press the tab in the direction of
the arrow and pull out the battery
holder.
2. Place the lithium button battery
with the
+
side facing up.
3. Insert the battery holder.
o
The wireless controller may not work properly when the remote sensor is
sUbjected to strong light sources or direct sunlight.
o
If the wireless controller does not work, check if the remote sensor is set to
[OFF(I(©](CiJ 77).
c)
When the camcorder cannot be operated with the wireless controller, or when it
can only be operated in very close range, replace the battery.