"~"
appears and" Od " moves to
indicate that the camcorder is writing on
the memory card.
Indicates the remaining time in hours
and minutes. At less than 1 minute, the
remaining time will be displayed in 10
second-steps, at less than 10 seconds
in 1 second-steps.
• The indication varies depending on
the recording condition. The actual
remaining time may be longer or
shorter than indicated.
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record
appears.
3. Press the start/stop button to stop recording.
R:e. . k grdicg.f[Qm. . . .
Qlbg[~ideg
. .
D gyike~
You can record movies from devices connected via the AV terminal (analog line-in
function), or via the DV terminal on a memory card. For connecting instructions, refer to
page 36 and 79.
I
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure the tape is stopped.
• When recording via the AV terminal, make sure that "AV ... DV" is displayed on the
screen. When recording via the DV terminal, make sure that "AV ... DV" is not
displayed. Change the setting as necessary
(CO
84).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the start/stop button when the scene you wish to record
appears.
4. Press the start/stop button to stop recording.
-
c :
CIl
5'
cc
Q)
S
CD
3
o
~
(")
~
a.
101