Canon Elura 90 Instruction Manual page 86

5. Press the AUDIO DUB. button on the wireless
controller.
"AUDIO DUB." and
l/:
II"
appear.
6. Press the PAUSE II button on the wireless controller
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP. button on the wireless controller
to stop dubbing.
Audio device: Stop playback.
II
~
S2 S2
e o o
~=>o
I ~I
lEROSE!
AUUluDUB.MEMORY TV SCREEN
" " "
AUDIOOU8.MEMORY TVSCREEN
" " "
86
a
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
a
i3"€¥!i
uh
3"€¥!:?i
When using the built-in microphone, do not connect any
devices to the MIC terminal.
a
You cannot use the DV terminal for audio dubbing.
a
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
a
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
a
You can check the picture on the LCD screen.
a
When you connect an audio device, check the sound via built-in speaker or
audio device.
a
When you use a microphone, you can check the picture on a TV connected via
the AV terminal and the sound via headphones connected to the TV.
a
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.