Canon Elura 90 Instruction Manual page 81

Recording from Analog Video
Devices (VCR, TV
or Camc~rder)
You can record videos or TV programs from a VCR or analog camcorder on the tape in
the camcorder.
I
D~
WIDESCREENI
REC PAUSE
1. Connect the camcorder to the analog video device.
See
Playing Back on
a
TV Screen
(QJ 36).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected device: Play back the tape.
6. Press the ~/II button when the scene you wish to
record appears.
Recording starts.
7. Press the. button to stop recording.
• Press the
~
I
II
button to pause recording.
• Press the
~
III
button again to restart recording.
8. Connected device: Stop playback.
NIGHT MODE
~
-
m
a.
;::+
:i"
cc
o
Headphones cannot be used during analog line-in recording.
o
Depending on the signal sent from the connected device, dubbing may not work
properly (e.g. signals that include copyright protective signals or anomalous
signals such as ghost signals).
_ We recommend powering the camcorder from a household power source .
•
81