Table of Contents
Advertisement
Advanced
Functions
ss
Wireless Controller
The wireless controller can operate the camera
from a distance of up to 5 metres. Point it at the
camera's remote sensor while you press the
buttons.
The tally lamp lights up to let you know that the
camera is in range and responding to your
commands.
There are two functions which can only be
operated using the wireless controller:
* Tape return (p.13)
* On-screen viewfinder displays (p. 37)
Inserting batteries
insert two AA batteries, following the © and ©
markings. Be careful not to reverse the polarity of
the batteries.
Turning off the tally lamp and
remote sensors
TALLY/
SENSOR
ON/OFF 4
The tally lamp flashes continuously while the
camera is recording. It can be turned off to prevent
light being reflected into the lens during macro
recording, or when shooting through glass.
Turning off the remote sensor prevents accidental
operation by other Canon wireless controllers being
used nearby.
1. Press the TALLY/SENSOR ON/OFF
button to turn off the tally lamp and the
remote sensor.
¢ T/S OFF appears in the viewfinder.
2. Press the button again to turn the lamp
and sensor on.
Notes:
* Sunlight or fluorescent light falling on the sensor
may shorten the controller's operating distance
by interfering with its infrared signals.
¢ The camera may have difficulty picking up the
remote control signals at extremely close range.
* Do not leave the controller exposed to direct
sunlight, or in hot or humid places.
* When changing exhausted batteries, replace
them all at once.
Advertisement
Table of Contents
