Canon Elura 90 Instruction Manual page 96

BIil~gtdillg,fI:Qw)iCtb,lilit;gllid~ignC~¥ii~i~'&'
You can record images from devices connected via the AV terminal (analog line-in
function), or via the DV terminal as still images on a memory card. For connecting
instructions, refer to page 36 and 79.
I
96
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure that the tape is stopped.
• When recording via the AV terminal, make sure that "AV-+ DV" is displayed on the
screen. When recording via the DV terminal, make sure that "AV-+ DV" is not
displayed. Change the setting as necessary
(OJ
84).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
4. Press the PHOTO button fully.
The card access indicator flashes.
o
When recording from a tape in the camcorder or other video devices:
- A still image recorded from an image in widescreen mode will be vertically
compressed.
- The data code of the still image will reflect the date and time it has been
recorded on the memory card.
- The size of the still image will be 640 x 480. The still image quality can be
selected.
o
When connecting with a DV cable, make sure that no USB cable is connected
to the camcorder.