Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in microphone
(MIC.IN). With the ELURA90/ELURA85, you can also use an external microphone
(MIC.IN).
This function is operated with the wireless controller.
CD
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
®
'3I1k¥¥nthllkJ":~i
Connecting a Microphone
See Recording with an External Microphone (OJ 62).
m
c..
;+
5"
c.o
-
' 1
~=S2
~DD
~=sc3
II
AUuluDUB
j,iiWoW
TVSCREEN
r - ' \
r - ' \
r - ' \
Signal flow
q
I
STV-250N Stereo Video Cable
(supplied)
Audio device
(e.g. CD player)
MENU
I
AUDIO SETUP
I~I
AUDIO DUB.··· AUDIO IN
0:038)
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it
to [AUDIO IN] or [MIC.lN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE II button on the wireless
controller.
85