REMOVAL AND
INSTALLATION
Take care not to stain seat and seat
back upholstery.
Lift and remove seat.
1.
2. Unscrew the screw securing to
body
the
seat
back
p a r t @ t h e n l i f t s e a t b a c k a n d
remove it.
REAR CONSOLE
1 Rubber bellows 3 Ashtray
2 Console
M a y 1 9 8 3
INTERNAL TRIMMING
fixed
1
Seat back fixed part
3 B o d y
4 Door compartment seal
By means of proper tool, with-
3.
draw plastic rivets securing luggage
room
upholstery
CONSOLES
6 6 - 1 0
4 . U n s c r e w n u t s e c u r i n g s e a t
back @ to body @ and remove it.
1 Seat back
2 Kick plate
3 Door compartment seal
4 B o d y
5. Carry out same procedure for
removal of the other seat back.
6. Install seat backs and seat, by
reversing order of removal.
t o s e a t b a c k .
REMOVAL AND
INSTALLATION
1. Remove rubber bellows located
on parking brake.
2. Remove ashtray, which is pres-
sure secured.
3 . U n s c r e w t h e s c r e w s e c u r i n g
console and remove it by moving it
first forward in order to withdraw
i t f r o m c l a m p l o c a t e d o n f l o o r
tunnel.
4.
Install console by reversing order
of removal.