Outer Side Member - Alfa Romeo alfa 33 Workshop Manual

OUTER SIDE MEMBER

Service joints
Parts to be welded
a. Outer side member, front side member and inner
front pillar
Outer side member, diaphragm and central floor side
b.
member
REMINDER WHEN REMOVING
.
By means of air chisel, cut according to line A shown
in figure.
BODY -SHEET METAL PANELS
c. Outer side member and closing inner central pillar
d.
e.
f.
l
Outer side member and inner wheelarch
Outer side member and outer wheelarch
Outer side member and central pillar reinforcement
Remove paint in correspondence with the four
welding spots of pillar reinforcement lower part at
about 115 mm (4.52 in) from lower edge of outer
side member (see section A-A).
Punch the four welding spots.
By means of a drilling machine, remove welding spots
of the 3-layered sheet joints.
M a y 1 9 8 3