Alfa Romeo alfa 33 Workshop Manual page 194

2. Loosen the screw securing the
primat-y shaft to its rear bearing and
remove the oil deflector.
3. Using tool A.3.0495 remove the
5th speed driving gear 0.
1 5th speed driving gear
4. Pull out the tongue securing the
5th speed driving gear to the primary
shaft.
5. remove
Loosen and
screw 5 securing t h e p r i m a r y
shaft 3 front: floating bearing @.
1 Bearing lock ring 4 Front bearing
5 Bearing retaining
2 Fiear bearing
3 Primai-y s h a f t screw
6. Remove lock ring @ from rear
bearing 0.
GEARBOX
1 Bal1 bearing 2 Lock r i n g
7 .
F i t
gearbox-differential casing.
8. Fit rear bearing on
shaft 0, together with the first
section (fork
A-3.0490, at the location of the 4th
speed driving gear. Now fit the
s e c o n d s e c t i o n o f tool A.3.0490
locking it on the pinion, by means of
the relevant nut, a't: the location of
the 5th speed driven gear.
A.3.0490
1
1 3 - 1 3
9. Fit tool
gearbox-differential casing and then
fit the A-3.0492 end piece.
Carefully tighten the screws securing
differential casing to avoid damaging
the casing's threads.
10. With the above mentioned tool,
push the primary shaft toward the
differential casing.
o f tool
N o w r e m o v e t h e f r o n t f l o a t i n g
bearing from the primary shaft.
11. Remove the 4th speed driving
gear and relevant tongue.
1 4th speed driving gear
A.3.0296 on the