Disassembly - Alfa Romeo alfa 33 Workshop Manual

D I S A S S E M B L Y
1. Remove clamp @ fixing right
b o o t @ t o s l i d i n g s l e e v e 0.
2 . E x t r a c t e n d c a p 0, r e m o v e
plastic support @ and extract right
boot 0.
Plastic bellows be replaced whenever
disassembled from steering tube for
any reason.
1 End cap 4 Clamp
5 Sleeve
3 Right boot
3. By means of nut
unscrew and extract studs 0, then
remove plate @ and spacer @ for
rod support.
4 . R e m o v e c l a m p @ fixing left
boat 4 a n d e x t r a c t i t f r o m
sleeve 1 , then extract sleeve from
rack tube.
Sleeve 5 Plate
2 Spacer 6 Nut and lock nut
3 Clamp 7 Studs
Left boot
4
Remove the sliding member @
5.
from rack guide tube 0.
2 Sliding member
1 Tube
May 1983
STEERING SYSTEM
6.
Remove the cover @ from rack
b o x 0, s c r e w
adjustment screw 0, spring @
and plunger @ for backlash. Then
lever with a screwdriver and remove
lower protection cap @ of rack
control pinion.
1
screw
3 Spring
7.
E x t r a c t r a c k @ f r o m g u i d e
and lock
tube 0.
1 Rack
8 . R e m o v e l o c k r i n g @ f i x i n g
pinion bearing to rack box.
1 Lock ring
a n d e x t r a c t
U P
4 Plunger
5 Rack box
6 Lower cap
2 Guide tube
2 3 - 8
9. Remove pinion from rack box
together with the bearings, by means
of a plastic hammer and a supporting
base.
10. Remove lock ring
bearing
placing it in a vice provided with
protective jaws.
3 Pinion
2 Bearing
11. Disassemble bearing @ from
pinion 0 by means of a punch and
a suitable base.
1 fixing
8