External Lights; Dipped Beam Headlights; Daytime Running Lights (Drl) And Side Lights (Daytime Running Lights); Rear Fog Light - Alfa Romeo Tonale Quick Manual

WARNING
2) Always take the key with you when
you leave your car to prevent someone
from accidentally operating the controls.
Remember to engage the electric parking
brake. Never leave children unattended
in the car.
3) Before leaving the car, ALWAYS engage
the electric parking brake. Activate mode
P (Park) and press the ignition device
to set it to STOP. When leaving the car,
always lock all the doors by pressing the
button on the handle.
4) For versions equipped with the Keyless
Start system, do not leave the electronic
key inside or near the car or in a place
accessible to children. Do not leave the
car with the ignition device in the ENGINE
position. A child could activate the electric
window winders, other controls or even
start the car.

EXTERNAL LIGHTS

16

DIPPED BEAM HEADLIGHTS

Turn the light switch (1) fig. 16 to
to switch on the side lights, the lights
on the instrument panel and the dipped
beam headlights.
The warning light switches on in the
instrument panel.
DAYTIME RUNNING LIGHTS
(DRL) AND SIDE LIGHTS
(Daytime Running Lights)
(where provided)
5) 6)
With the ignition device in the ENGINE
position and the light switch (1) fig. 16
turned to the position, the daytime
running lights, the rear light clusters
and the number plate lights turn on
automatically.

REAR FOG LIGHT

Press the button (2) fig. 16 to switch
the light on.

PARKING LIGHTS

They are turned on if the light switch (1)
fig. 16 is turned first to the
and then to the position within a few
seconds from stopping the engine.
The warning light switches on in the
instrument panel.

MAIN BEAM HEADLIGHTS

9650263
Push the left stalk forward towards
the instrument panel (2) fig. 1. The light
switch must be turned to the
position.
With main beam headlights on, the
warning light/icon
panel will come on.
The main beam headlights are switched
by pushing the left stalk forward again.

DIRECTION INDICATORS

Move the left stalk (2) fig. 1 to the end
of its travel (unstable position) up (right
indicator) or down (left indicator).
Warning light or
instrument panel
"Lane Change" function
When you want to signal the change of
the driving lane, move the lever until the
first impulse (about half stroke).
position
or
on the instrument
will blink on the
13