Service Data And Specifications; General Specifications; Inspections And Adjustments - Alfa Romeo alfa 33 Workshop Manual

BALANCE WEIGHTS
POSITIONING
location of balance weights
=
tramp direction
=
shimmy direction
location of unbalance causing
=
heavy area

SERVICE DATA AND SPECIFICATIONS

GENERAL SPECIFICATIONS

FLUIDS AND LUBRICANTS
Application
Tire beads

INSPECTIONS AND ADJUSTMENTS

DYNAMIC BALANCE
Max. allowed residual unbalance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thread thickness limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel screws tightening after the first
Balance weights (at 10 g (0.35 oz) interval)
WHEELS AND TIRES
1. Balance weights
Maximum allowable at rim flange:
8 g (0.28
O L
Balance weights:
10 4 40 (0.35 + 1.40 02)
at 10 g (0.35 02) interval
FLUID UNION CARBIDE CHEMICALS
COMPANY: Ucon lubricant 50 HE-5100
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 8 - S
a. Be sure to place correct balance
weights on inner edge of rim.
b.
D o n o t p u r e m o r e t h a n t w o
weights on each side.
Two types of balance weights
are used: one is designed for use
with steel wheels and the other
for use with light allowy wheels.
D o n o t m i x d i f f e r e n t t y p e
balance weights.
d. Properly rebalance wheel and
tire whenever puncture is re-
paired.
)
Denomination
8 g (0.280 04
1 mm (0.04 in)
May 7983