Fluke 8845A Manual page 57

Examples PER:APER 0.1
Query PER:APER?
[SENSe:]CURRent:AC:BANDwidth(?) <n>
Description Sets the appropriate filter for the frequency specified by <n>. This setting
is stored in volatile memory.
Parameters <n>
Examples CURR:AC:BAND 200
Query CURR:AC:BAND?
[SENSe:]VOLTage:AC:BANDwidth(?) <n>
Description Sets the appropriate filter for the frequency specified by <n>. This setting
is stored in volatile memory.
Parameters <n>
Examples VOLT:AC:BAND 20
Query VOLT:AC:BAND?
[SENSe:]DETector:BANDwidth(?) <n>
Description Sets the appropriate filter for the frequency specified by <n>. This setting
is stored in volatile memory and sets the filter for all functions that use an
ac filter.
Parameters <n>
Examples DET:BAND 20
Query DET:BAND?
DET:BAND? MAX
[SENSe:]FILTer[:DC][:STATe](?) <n>
Description Activates or deactivates the 3-pole analog filter to improve noise immunity
for dc functions. This setting is stored in volatile memory.
Parameters <n>
Sets the period measurement gate time to 100
ms.
Returns the gate time for the period function.
= 3 Selects slow filter
20 (default) Selects medium filter
200 Selects fast filter
MIN Selects slow filter
MAX Selects fast filter
Sets the filter for ac current to fast.
Returns the filter selection.
= 3 Selects slow filter
20 (default) Selects medium filter
200 Selects fast filter
MIN Selects slow filter
MAX Selects fast filter
Sets the filter for ac voltage to medium.
Returns the filter selection.
= 3 Selects slow filter
20 Selects medium filter
200 Selects fast filter
MIN Selects slow filter
MAX Selects fast filter
Sets the filter to medium.
Returns the filter selection.
Returns +2.00000000E+02 to indicate the fast
filter.
= OFF or 0 Turns the analog dc filter off.
ON or 1 Turns the analog dc filter on.
Remote Operation
Supported SCPI Commands
47