Disable/Restore Demo Application - Symbol MK2000 MicroKiosk Product Reference Manual

3. Insert the compact flash card into the CF card slot, see Figure 1-2 on page 1-4. To
access the CF card contents use the Storage Card folder located in My Computer.
4. Double tap the My Computer icon.
5. Double tap the Application folder.
6. Use copy function to copy the folder and file from the My Computer\Storage Card
folder into the My Computer\Application folder.
7. Reboot the MK2000 to launch the new version of the Resident Demo Application.
• To perform a cold boot press and hold buttons B and C until the display goes
blank (typically 15 seconds) then release buttons, see Figure 1-1 on page 1-3.
The MK2000 reboots.
• The Resident Demo Application launches automatically on power-up.

Disable/Restore Demo Application

1. To prevent the MK2000 from entering an application, simultaneously hold down
buttons A and D just after the blue Performing System Initialization (Phase 1)
screen appears. The A and D buttons must be held down before the message
changes to Phase 2.
2. When the Enter Password prompt appears, enter DDBAC and touch OK on the
screen, or simultaneously press the A and B buttons for Enter.
3. The MK2000 enters Protected Mode and the Win CE desktop appears.
4. Double tap the My Computer icon.
5. Double tap the Application folder.
6. Use cut function to cut the mkconfig.reg file from the My Computer\Application
folder.
7. Locate Resident_MK2000_Demo App folder and double tap on the folder.
8. Paste the mkconfig.reg file into the My
Computer\Application\Resident_MK2000_Demo_App folder.
9. Reboot the MK2000, the Windows
10. To restore the Resident Demo Application move the mkconfig.reg file back to the
the My Computer\Application folder.
Note: Delete the application if freeing up storage space is a requirement.
®
CE desktop will appear.
Resident Demo Application
4-5