Text Wrapping; Left Margin; Right Margin; Top Margin - Toshiba e-Studio 352 Printing Manual

Text Wrapping

The following options control text wrapping when it reaches the right margin.
Alternate
Option Value
Value
wrap
nowrap
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to specify wrapping is "lp -o wrap filename".

Left Margin

The left margin position can be specified with the following option.
Alternate
Option Value
Value
lm=value
If the left margin is set to the right of the right margin it will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the left margin to five columns is "lp -o lm=5 filename".

Right Margin

The right margin position can be specified with the following option.
Alternate
Option Value
Value
rm=value
If the right margin is set to the left of the left margin or if it is set to a position wider than the logi-
cal page it will be ignored. The right margin is specified in columns from the left margin. A nega-
tive value will be ignored.
If this option is not specified the command will not be sent so the printer's default value will be
used.
Example: The command to set the right margin to fifty columns is
"lp -o rm=50 filename".

Top Margin

The top margin position can be specified with the following option.
Alternate
Option Value
Value
tm=value
If the top margin is set too high or too low part of the text may not appear due to the printer's
unprintable region. The top margin will be ignored if it is set to a value greater than the printer's
logical page length. Setting this value may affect the number of lines specified using the page
length option.
Description
Enable automatic text wrapping.
Disable automatic text wrapping.
Description
Set the left margin to value columns.
Description
Set the right margin to value columns.
Description
Set the top margin to value lines.
Printing from an Application 319