Punching Holes - Toshiba e-Studio 352 Printing Manual

5 Printing from Windows
Stapling the paper
1
Display the Setup tab and select how to staple at the "Staple" drop
down box.
Upper Left — Select this to staple the printed document in the upper left.
Center Top — Select this to staple the printed document double along the top edge.
Upper Right — Select this to staple the printed document in the upper right.
Middle Left — Select this to staple the printed document double along the left side.
Center Double — Select this to fold and staple the printed document double in the
center.
The selectable options vary depending on the paper size.
"Center Double" can be selected only when the Saddle Stitch Finisher is installed and
configured on the Configuration tab.
2
Set other print options you require and click [OK].
3
Click [OK] or [Print] to send a print job.
The output is stapled for each copy.

Punching holes

1
Display the Setup tab and select how to punch holes at the "Hole
Punch" drop down box.
Center Top — Select this to create holes along the top edge.
Middle Left — Select this to create holes along the left side.
2
Set other print options you require and click [OK].
3
Click [OK] or [Print] to send a print job.
The output is hole punched.
248 Printing with Extended Print Functionality