Toshiba e-Studio 352 Printing Manual page 218

5 Printing from Windows
5) Print to Overlay File
When this is selected, the print job is saved as an overlay file that is imposed on other docu-
ments. For example, if you want to print a master page image on the background of a docu-
ment, you can create an overlay file of the master merge image using this option. Then you
can print a document using this overlay by specifying this file as an overlay image in the
"Overlay Image" option of the Effect tab.
If the print job has several pages in the document, only the first page of the document will
be saved as an overlay file.
Both the overlay file and the documents on which you superimpose the overlay image
must be created at the same size, and orientation.
When creating an overlay file using the PS3 printer driver from an application that can
create the PS command directly, the overlay file will not be created properly. In that case,
disable the "Use PostScript Passthrough" option in the PostScript Settings dialog box.
P.231 "PostScript Settings"
6) Store to e-Filing
Select this to save a job to an e-Filing box. When this is selected, select the box from the
drop down menu on the right. If the printer driver connects to this equipment via SMB, it
detects the available box numbers and Box name in the drop down box. If not, all box num-
bers are listed in the drop down box.
If you select a user box, you may be required to enter the appropriate password for the
selected box. The job saved to a box can be printed from the Touch Panel Display at a later
time. It can also be composed with other documents using the e-Filing web utility.
You can also print a job and save it to a box by checking on the "Print" option.
When you store a document in e-Filing using the printer driver, the printing image (not the
original document in your computer) will be stored in e-Filing.
For more information about e-Filing operations, see e-Filing Guide.
7) Destination
This selects the destination tray to which jobs will be output.
- Inner Tray — Select this to route the output to the inner tray.
- Tray 1 — Select this to route the output to the upper tray of the Finisher.
- Tray 2 — Select this to route the output to the lower tray of the Finisher.
- Job Separator Upper — Select this to route the output to the upper tray of the Job Sep-
arator.
- Job Separator Lower — Select this to route the output to the lower tray of the Job Sep-
arator.
216 Setting Up Print Options