Adjustment Of Smudged/Faint Text - Toshiba e-STUDIO163 Service Handbook

3.3.6

Adjustment of smudged/faint text

The smudged/faint text can be set at the following codes.
Original mode
Text/Photo
928 Adjustment of smudged/faint
spotted text
(Custom Mode)
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
<Procedure>
Procedure is same as that of
e-STUDIO163/203 ADJUSTMENT
Item to be adjusted
P. 3-18 "3.3.1 Density adjustment".
< Adjustment Mode (05) >
When the value increases, the faint text is improved.
When the value decreases, the smudged text is
improved.
Acceptable values: 0 to 4 (Default: 2)
Note: Note:
Remember the image specifications and life
span of the replacing parts may not meet the
standard when the setting value is changed
from the default value.
3 - 22
Remarks
December 2005 © TOSHIBA TEC