Initiating A Call From Contacts; Initiating A Call From Calls; Initiating A Call From The Central Directory - Mitel 112 User Manual

Handset

Hide thumbs Also See for 112:

Table of Contents

Line Call

If the handset is used in a multiline environment, it is possible to make a call from different

lines. The line must be predefined via the settings menu. Refer to the settings section of this

guide.

Note: To see additional information on the "Line" function, please check the base system

document via [2].

INITIATING A CALL FROM CONTACTS

To initiate a call from the contact list, there has to be contacts added to the local phonebook.

When this prerequisite is met a local contact can be called by highlighting the contact in the

contact list and then pressing the green "Off-hook" button.

Note: The list of local contacts can be reached from the menu "Contacts" or directly from idle by

pressing the left softkey when in idle.

The number of an outgoing, incoming or missed call can be called directly from the call list by

highlighting the number and pressing the green "Off-hook" button to call the entry.

Note: The "Calls" list can be reached from the menu "Calls" or directly from idle by pressing the

green "Off-hook" button.

When opening the "Central directory" a call can be made to a specific contact by searching

for this contact, and thereby enter the list from which a contact can be called by pressing the

green "Off-hook" key.

If different numbers are assigned to one contact, a green arrow is showed to the right of the

contact, and the right/left navigation keys can be used to choose which number that should

be called.

Note: The "Central Directory" can be reached both from the menu "Central Directory" or directly

from the idle by pressing the right softkey when in idle.

Table of Contents

Show Quick Links

Table of Contents