Test Pattern; Network - Ask Proxima S400 series User Manual

Expand

Test Pattern

This function is used to set the internal test
signal:Gray scale 1, Gray scale 2, Gray scale
3, Gray scale 4, Color bar, Red, Green, Blue,
Cross hatch, White, Black and Gray.
*

Network

*:Some models have no this function.
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to
connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface
on will flash continuously.
Operation procedures:
1 Turn on the projector.
2 Obtain network address. DHCP set is displayed as On and obtain network address
automatically.( If familiar with network, you can set DHCP as Off and obtain network
address manually.)
3 Enter network settings menu.
(1) Press MENU button on remote control
to display screen menu. Press 
button to select Expand, then press
OK button.
(2) Press  button to select Network,
and then press OK button to enter the
newtork menu.
44
Test Pattern
Off
Display 
Gray scale 1
Color adjust
Gray scale 2
Gray scale 3
Setting
Gray scale 4
Expand
Color bar
Red
Memory
Viewer
Green
Blue
Info.
Cross hatch
Move
Display
Network setting
Network information
Color adjust
MAC address:
IP address:
Setting
Expand
Memory
Viewer
Info.
Move
Test pattern 1/2
Select Back
Network
00:04:A3:97:61:B4
192.168.001.023
Next Back