Auto Pc Adj; Fine Sync; Position; H.size - Ask Proxima S400 series User Manual

Following items can be set in Display menu: Auto PC adj., Fine sync, H Postion, V Postion, H.Size,
Aspect, Projection Way, Menu position, Background display and System.

Auto PC adj.

This function is provided only for computer
signals input.
Press AUTOSET button on the remote control
to adjust Fine sync, H postion, V postion and
H.Size automatically to conform your computer.
√ Note:
- Total dots and horizontal & vertical positions
of some computers cannot be fully adjusted
with this Auto PC adj. function. When
the image is not provided properly with this
function, manual adjustments are required.
- The Auto PC adj. cannot be operated when
480i, 576i, 480p, 576p, 720p, 1080p or 1080i
is selected in the System menu of computer
input.

Fine sync

You can cut off flicker from the image displayed
by pressing  to adjust the value.(from 0 to
31).
H Position
Press  to adjust the horizontal image

position.

V Position
Press  to adjust the vertical image position.

H.Size

This function is used to adjust and minimize
the effect of interference caused by projection
of patterns consisting of vertical stripes.
The projection of the vertical striped pattern
may cause cyclic patterns (noise). Adjust to
minimize the amount of iinterference.(From -15
to +15).
H.Size must be set before adjust Fine sync.
√ Note:
The adjustment of Fine sync, H Position, V
Postion and H.Size is only for computer
signal input.
Display Menu
Auto PC adj.

Display

Fine sync
H Position
Color adjust
V Position
Setting H. Size
Aspect
Expand
Project Way
Memory Menu position
Viewer
Background Display
Info.
System
Move
Display
14
0
0
0
Normal
Front
Upper left
Blue
1024 x 768, 60Hz
Next Exit
27