Factory Default - Ask Proxima S400 series User Manual

(3) When DHCP is set On, IP address,
Subnet, Gateway and DNS will be
abtained automatically, press OK at
"Set" to confrim the parameters.
When DHCP is set Off, press OK
button to enter IP address, then
press button to enter Subnet,
Gateway and DNS respectivelt,
press OK at "Set" to confirm the
parameters.

Factory default

This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.
LAN Network setting
DHCP
IP address
Subnet
Gateway
DNS
Adjust Select
LAN Network setting
DHCP Off
IP address 192
Subnet 255
Gateway 192
DNS 192
Move Select
Expand
On
Set Cancel
Back
168 1 100
255 255 0
168 1 1
168 1 1
Set Cancel
Back
45