Expand; Language; Auto Setup - Ask Proxima S400 series User Manual

Expand

The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on remote contro to
display screen menu. Press  button to
select Expand , then press OK button.
2 Press  button to select the item you
want to set, press OK button.
3 Press  button to adjust the item, then
press OK button.

Language

This projector provides multi-language screen
menu.
You can press  button to select the
language you desire.

Auto setup

This function is used to execute Input search
and Auto PC adj. and Auto keystone functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found. Press
 button to select an option below:
On........Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Off........Disabled.
Auto PC adj.
On........Press the AUTOSET button on the
remote control to enable Auto PC
adj. function automatically.
Off........Cancel Auto PC adj. function.
Auto keystone
Auto......To correct keystone distortion
depending on the slope of the
projector all the time.
Manual .To enable the function by
pressing AUTOSET on the top
control or remote control.
Off.........Disabled.
38
Expand
Language
Display
Auto setup
Keystone
Color adjust
Logo
Setting Security
Power management
Expand
Filter counter
Memory Test pattern
Viewer
Network
Info.
Factory default
Move
Auto setup
Display
Input search
Auto adj.
Color adjust
Auto keystone
Setting
Expand
Memory
Viewer
Info.
Move
 Note:
- Only the last selected input source can be
detected.
- If the INPUT button on the top control or on the
remote control is pressed during Input search is in
progress, Input search will stop and go back to the
previous input signal.
- Fine sync., Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adj. function.
When the image is not provided properly with this
operation, manual adjustments are required.
Next Exit
Auto setup
On
On
Auto
Next Back