Turn Off The Projector - Ask Proxima S400 series User Manual

Turn off the projector

1. Press the Power button on top control
or on the remote control, and "Power off?"
appears on the screen.
2. Then, press the Power button again in 4
seconds. The ON(G)/STANDBY(R) indicator
starts to flash red, and the cooling fans
keep running (You can select the level of
fans' quietness and running speed.). Now
you can unplug the AC power cord after the
fans stop running.
3. When the projector has cooled down enough
to be turned on again, the ON(G)/
STANDBY(R) indicator stops flashing.
To maintain the lamp life, once you turn
the projector on, wait at least 5 minutes
before turning it off.
Do not operate the projector
continuously without reset.
Continuous use may result in shortening
the lamp life.Turn off the projector and
let it stand for about an hour in every 24
hours.
 Note:
● When the On start function is "On" , this
projector is turned on automatically by
connecting the AC power cord to an AC outlet .
● The running speed of cooling fans is changed
according to the temperature inside the
projector.
● Do not put the projector in a case before it is
cooled enough.
● If the ON(G)/STANDBY(R) indicator flashes or
emits a red light, see "ON(G)/STANDBY(R)
indicator".
● While the ON(G)/STANDBY(R) indicator is
flashing, the lamp is being cooled down and
the projector cannot be turned on. Wait until
the ON(G)/STANDBY(R) indicator turns red to
turn on the projector again.
● The fan rotation will terminate directly if the
AC power cord is unplugged immediately after
the projector is turned off.
● The projector can be turned on after the
ON(G)/STANDBY(R) indicator turns red. The
waiting time to restart will be shortened when
the normal power-off processing for fan
cooling is completed, comparing with the time
the AC power cord is immediately unplugged
after the power-off.
Power off ?
"Power off ? " disappears after 4 seconds.
Basic operation
19