Expand
The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on remote contro to
display screen menu. Press butto to
select Expand ,then press OK button.
2 Press button to select the item you
want to set, press OK button.
3 Press button to adjust the item, then
press OK button.
Language
Press button to select the language for
screen manual.
This projector provides 23 lanuages.
Auto setup
Press AUTOSET button on the remote control
to execute Input search and Auto PC adj.
functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found.
Press button to select an option
below:
Off........Disabled.
On........Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Auto PC adj
On........Press the AUTOSET button on the
remote control to enable Auto PC
adj. function automatically.
Off........Cancel Auto PC adj. function.
Auto keystone
Off........Disabled.
Auto......To correct keystone distortion
depending on the slope of the
Manual ..To enable the function by
Downloaded From projector-manual.com ASK Manuals
projector all the time.
pressing AUTOSET on the top
control or remote control.
Expand menu
Language
PC adjust
Auto setup
Logo
Display
Security
Power management
Color adjust
Filter counter
Setting
Test pattern
Network
Expand
Factory default
Info.
Move
Auto setup
PC adjust
Input search
Auto PC adj.
Display
Auto keystone
Color adjust
Setting
Expand
Info.
Move
Note:
- Only the last selected input source can be
detected.
- If the INPUT button on the top control or on the
remote control is pressed during Input search is in
progress, Input search will stop and go back to the
previous input signal.
- Input Search and Auto PC Adj.cannot be set Off at
the same time.
- Fine sync., Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adj. function.
When the image is not provided properly with this
operation, manual adjustments are required.
Next
Exit
Auto setup
Off
On
Off
Next
Back
41