Auto Pc Adjustment - Ask Proxima E3000 series User Manual

Auto PC adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and
Vertical to conform to your computer.
Menu operation
Auto PC adjustment
1 Press MENU button on side control or remote
control to display the on screen menu.Press
 button to select the input source icon and
press or OK button.

2 Press button to select Auto PC adj., and

then press OK button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector.
√ Note:
● Total dots and horizontal & vertical position of some computers cannot be fully adjusted with this
Auto PC Adjustment function. When the image is not provided properly with this function, manual
adjustments are required.
● The Auto PC Adjustment cannot be operated when 480i, 576i, 480p, 576p, 720p, 1035i, or 1080i is
selected in the PC System Menu.
PC adjust menu
PC adj.
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Clamp
Display area H
Display area V
Reset
Mode free
Stored
- - - -
Exit Move
Computer input
16
1344
296
35
1
1024
768
Next Next
31