Basic Operation; Turn On The Projector - Ask Proxima E2465 User Manual

Basic operation

Turn on the projector

1.Complete peripheral connections (with a
computer, VCR,etc.) before turning on the
projector.
2. Connect the projector's AC power cord into
AC outlet.The POWER indicator turns red.
3. Press the POWER button on side control or
on the remote control. The POWER indicator
becomes green and the cooling fans start to
work. The preparation display appears on
the screen and the countdown starts.
4. If the projector is locked with a PIN code, a
PIN code input dialog box appears. Enter
the PIN code as instructed below.
 Note:
● When the logo select is set to be "Off" the
logo will not be displayed on the screen.
● When the Display function is set to be "Off" ,
the logo and countdown will not be displayed
on the screen.
● During the countdown period, all operations
are invalid except shutdown.
Enter a PIN code
Select a number by pressing  button, and
then press  button to fix the number and
move the cursor. The number changes to "*". If
you fixed an incorrect number, move the cursor
to the number you want to correct by pressing
 button, and then select the correct number
by pressing button.
Repeat this step to complete entering a three-
digit number.
After entering the three-digit number, move the
cursor to "Set", then you can start to operate
the projector.
If you entered an incorrect PIN code, the "PIN
code" and the
number (***) turn red. Enter the correct PIN
code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
can prevent unauthorized use of the projector.
A PIN code consists of a three-digit number.
Refer to the PIN code lock function in the
Advanced setting menu on pages 47 for PIN
code lock operation of the projector.
20
*
Set
- - - - Adjust
*
*
Set
- - - -
- - - - - - - -
Move the cursor to Set, and press SELECT.
Caution on handling the PIN code
If you forget your PIN code, the
p r o j e c t o r c a n n o t l o n g e r b e
started.Take a special care in
setting a newPIN code. Write
down the number in a column on
page 61 of this manualand keep it
properly. Should the PIN code be
missing or forgotten, consult your
dealer or service center.
PIN code
0
Clear
Move - - - -
PIN code
*
*
Clear
Move Select