LP 100R Laser Printer Operator's Guide
Print Configurations
The Print Configurations function produces a printout of all of the configurations
stored on the controller's hard drive.
Note: The procedures that follow assume that the default 11" (height) by 14.5"
(width) form size has been loaded into the printer.
1. Select Print Configurations from the Operator Express menu.
2. When prompted to do so, press Enter.
3. After all of the configurations print, press Feed to clear the last printed page
from the printer.
Figure 3-15
shows a sample configuration page.
Rev: 1
Page 3-22
of 32 pages
Chapter 3: Printer Operation
April, 2014