LP 100R Laser Printer Operator's Guide
To Archive
1. Select To Archive from the Manage Archive Fonts menu and press Enter.
2. The following screen displays:
Figure B-14. Move fonts from active to archive directory.
3. Using the Up and Down buttons, select each font to be moved from the active
directory to the archive directory, pressing Select after each font selected.
Note: When Select is pressed, an asterisk (*) displays to the left of the font
selected for deletion.
4. If any font selected for movement from the active directory to the archive
directory is not to be moved:
a. Reselect the font.
b. Press Select.
c.
The asterisk (*) is deleted, and the font is not moved to the archive
directory.
5. When all fonts to be moved from the active directory to the archive directory
have been selected, press Enter.
Rev: 1
Page B-18
of 60 pages
Appendix B: Managing Files
April, 2014