Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
7. The following screen displays:
Note: If any new screens are included in the system program being installed,
there will be a slight delay before the above screen displays.
8. Select Full Install and press Enter.
9. When the installation of the software is complete, the audible alarm sounds
continuously and the following screen displays:
Figure A-2. System Program – FULL INSTALLATION completed.
Rev: 1
Figure A-1. Full Install selected.
Page A-4
of 10 pages
Appendix A: Installing System Software
April, 2014
Advertisement
Table of Contents
