SATO LP 100R Operator's Manual page 204

LP 100R Laser Printer Operator's Guide
3. Press the Up or Down triangle to move the selection bar to the desired
Material Type.
4. Press Enter to save the type selected.
Note:
Pressing Enter after any Printer Setup function has been executed saves the

function. However, it does not store the function.
When the configuration completes, press Back until the Store Configuration

screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page 6-63).
Page 6-90
of 128 pages
Chapter 6: Supervisory Functions
April, 2014