SATO LP 100R Operator's Manual page 68

LP 100R Laser Printer Operator's Guide
5. Remove the developer unit (marked C).
Note: To avoid damaging the OPC drum, make sure to remove components in
this order:
a. OPC cartridge
b. Developer unit
6. Use a dry cotton swab or other suitable material to wipe off stains on the AIDC
sensor.
AIDC sensor
7. Re-install the developer unit to its original position.
Rev: 1
Chapter 4: Printer Maintenance
Developer unit (C)
Page 4-8
of 24 pages
April, 2014