Accessories; Optional Equipment - Lincoln Electric PRECISION TIG 275 Operator's Manual

®
PRECISION TIG 275

OPTIONAL EQUIPMENT

FACTORY INSTALLED OPTIONS
The basic Precision TIG ® 275 machine is factory equipped with:
• A 3/8" Adapter (S20403-4) for air cooled torch connection of
a PTA-9 or PTA-17.
FIELD INSTALLED OPTIONS
The following Options/Accessories are available for the Precision
TIG ® 275 and are installed per instructions in this manual and /
or provided in the package:
• K2621-1 Precision TIG ® Advanced Control Panel Provides 2/4-
step trigger modes with adjustable Pulser/Spot con-
trols and Down slope timer for TIG welding. Also
allows adjustable Hot Start and Arc Force Menu set-
tings for Stick welding and Menu settings for TIG
Hot Start and Upslope, as well as other user selec-
table features.
• K1828-1 Under-Cooler Cart
Includes a "cooler-in-a-drawer" with hoses and a lockable
storage drawer on a dual bottle undercarriage (see below).
• K1869-1 Undercarriage
Includes a dual bottle rack with chain and an undercarriage
with 5" front casters,10" rear wheels and a handle.
• K1830-1 Water Solenoid Kit
Provides for stopping flow of external water supply. Connects
to coolant inlet and cooler receptacle of Precision TIG
(Can not be used with a water cooler.)
• K870 Foot Amptrol
Single pedal foot activation of arc start switch and output con-
trol, with 25' plug cable.
• K963-3 Hand Amptrol
Fastens to torch for convenient thumb activation of arc start
switch and output control, with 25' plug cable:
• K814 Arc Start Switch
Needed for TIG welding without an Amptrol. Includes 25' plug
cable, and attaches to torch for convenient finger control.
• K1831-1 Power Factor Capacitor Kit
Used when welding at higher output currents to reduce input
current and help keep electricity costs to a minimum.
• Magnum ® PTA and PTW Series Torches
All Air Cooled or Water-Cooled Magnum
used with the Precision TIG
only required for Air-Cooled Torches (Refer to Diagrams on
A-7) INSTALLATION SECTION:
K2166-1 7/8" Torch Connector for PTA-26 (one piece)
K2166-2 1/2" stud Connector for PTA Torch (two-piece).
K2166-3 3/8" TIG Torch Connector for PTA-9,-17 (one piece).
(Included as S20403-4 with Precision TIG
• 3100211 Harris Argon Flow Regulator (Includes 10' hose.)
• K2150-1 Work Lead Assembly
15ft. 2/0 cable with 1/2" stud lug and work clamp.
® .
C 1

ACCESSORIES

® TIG Torches may be
® 275. Connection adapters are
® models.)