Trane UniTrane Installation, Operation And Maintenance Instructions page 74

Controls Interface
Optional Features
Displaying Setpoint or Temperature.
temperature (default) or setpoint. To select either option:
1. Verify that the sensor is in operating mode and at the home screen.
2. Press the up and down arrows for 3 seconds. The arrow indicates setpoint display, as shown
Locking or Unlocking Settings.
prevent changes.
To lock or unlock a setting:
1. Verify that the sensor is in operating mode and at the home screen.
2. Choose a setting to lock or unlock:
3. Press the left and right arrows for 4 seconds.
74
in the figure.
Arrow
indicates
setpoint is
shown on
display
• Select the setpoint by pressing the up or down arrow.
• From the system menu press the down arrow to select the fan menu. Use the left or right
arrow to choose the setting.
You can configure the sensor to display either the
You can lock or unlock the setpoint, system, or fan setting to
Setpoint
Fan menu
UNT-SVX07B-EN