Media Placement - Heat & Glo LUX42 Installation Manual

E. Media Placement
WARNING! Choking Hazard! Keep media out of reach
of children.
WARNING
Delayed Ignition Risk
• Place media according to instructions.
• Do NOT place media in area in front of pilot or
between burner tracks.
• Do NOT place media in a position that they may
fall into area in front of pilot.
• Do NOT use any media other than the media
supplied with this fi replace.
• Do NOT use more than the amount of media
indicated in the instructions per fi replace.
Fireplace will not function properly.
Delayed ignition may occur.
Do not use more than 20 pounds of media in LUX36 or 24
pounds of media in LUX42. The LUX36 includes two 10
pound bags of media. The LUX42 includes one 10 pound
bag and one 14 pound bag of media.
1. Place media evenly on the log mounting plate. See
Figure 11.13.
2. When placing media around burner tubes, do not allow
media to fall into appliance.
Figure 11.13
3. The LUX36 and LUX42 appliances come with a rock
media placement jig installed. See Figure 11.14.
LOG MOUNTING PLATE LOG MOUNTING PLATE
Heat & Glo • LUX36, LUX42 Installation Manual
Figure 11.14 Rock Media Jig
4. Use all media supplied with appliance. Once media
is properly installed, carefully remove the rock media
placement jig. Do not allow any media to fall into the
opening. See Figure 11.15. Store the rock media
placement jig for later use.
Figure 11.15 Remove Rock Media Jig
• 2287-980 Rev. L • 2287-980 Rev. L • 4/16
REMOVE REMOVE
SCREW SCREW
NO ROCK IN NO ROCK IN
HATCHED HATCHED
AREA AREA
49