Replacing The Mini Pci Card Assembly - Dell Inspiron 8100 Service Manual

Removing and Replacing Parts : Dell Inspiron 8100
3. To release the Mini PCI card assembly, spread the metal securing tabs until the
assembly pops up slightly.
4. Disconnect the assembly from the wiring harness or internal antenna.
5. Lift out the assembly and disconnect any attached cables.

Replacing the Mini PCI Card Assembly

1. Align the Mini PCI card assembly with the connector at a 45-degree angle, and
press the Mini PCI card into the connector.
2. Depending on what type of Mini PCI card you are installing, either connect the
wiring harness to the Mini PCI card assembly, or connect the mini-coax antenna
cable to the Mini PCI card assembly and to the internal antenna.
NOTICE: The connectors are keyed for correct insertion; do not force the
connections.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (14 of 56) [2/28/2004 7:37:23 AM]