Removing The Led Board; Replacing The Led Board; Fan Assembly - Dell Inspiron 8100 Service Manual

Removing and Replacing Parts : Dell Inspiron 8100
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface on the computer.

Removing the LED Board

1. Follow the instructions in
2. Remove the
3. Remove the two M2 x 4-mm screws.
4. Pull the LED board away from its connector.

Replacing the LED Board

1. Align the two screw holes with the two mounting holes on the bottom case
assembly, and press the board into its connector.
2. Replace the two M2 x 4-mm screws.

Fan Assembly

file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (52 of 56) [2/28/2004 7:37:23 AM]
"Preparing to Work Inside the
hinge cover.
Computer."