Removing Media Bay Devices; Removing The Memory Module Cover; Memory Modules - Dell Inspiron 8100 Service Manual

Removing and Replacing Parts : Dell Inspiron 8100
Media Bay Devices
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface on the computer.

Removing Media Bay Devices

1. Follow the instructions in
2. Close the display, turn the computer upside down on a flat work surface, and
remove the main battery.
3. Remove the device from the media bay.
4. Push the module latch toward the right side of the computer. Keep holding the
latch open while pulling the device out of the media bay with the other hand.

Memory Modules

NOTICE: Disconnect the computer and attached devices from electrical outlets
and remove any installed batteries.
NOTICE: To avoid possible damage to the memory module from ESD, ground
yourself by using a wrist grounding strap or by periodically touching an
unpainted metal surface on the computer.

Removing the Memory Module Cover

NOTICE: To avoid damaging the system board, you must remove the main
battery before you service the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/8100/remove.htm (10 of 56) [2/28/2004 7:37:23 AM]
"Preparing to Work Inside the Computer."