Panasonic Toughbook CF-28 Series Reference Manual page 8

Touch Pad
(Advanced)
When you want to use an external mouse through the external
keyboard/mouse port
When an external mouse or trackball with additional functions (e.g., wheel function)
is connected, a part or all of the additional functions may fail to operate. To use these
additional functions, perform the operation below.
If you are using a USB mouse, the following operation is unnecessary.
Windows 98
1 In [Control Panel] - [Add/Remove Programs], select [touchpad/touchscreen] from
the list and then select [Add/Remove] to delete it, then select [Yes] to confirm the
deletion.
2 The display will ask you to restart Windows, select [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable] and close the Setup Utility.
5 Following the operation manual of the connected external mouse, install the nec-
essary driver.
Windows 2000
1 In [Control Panel] - [Add/Remove Programs], select [touchpad/touchscreen] from
the list and then select [Change/Remove] to delete it, then select [Yes] to confirm
the deletion.
2 The display will ask you to restart Windows, select [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable] and close the Setup Utility.
Log on to Windows by using the keyboard. (Up to step 5, use the keyboard for all
operations. The mouse will not function until the computer restarts. Applications
can be changed with Alt + Tab .)
5 Restart your computer by using the keyboard (
Down").
6 Following the operation manual of the connected external mouse, install the nec-
essary driver.
Windows NT
1 In [Control Panel] - [Add/Remove Programs], select [touchpad/touchscreen] from
the list and then select [Add/Remove...] to delete it, then select [Y es].
2 Select [OK].
If the message appears to reboot your computer, select [No].
3 Power off your computer (
external mouse or trackball device to the computer.
4 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable] and close the Setup Utility.
5 Following the operation manual of the connected external mouse, install the nec-
essary driver.
"Starting Up/Shutting Down") and connect the
page 53). In [Main] menu, set
"Starting Up/Shutting Down") and connect the
page 53). In [Main] menu, set
"Starting Up/Shutting
"Starting Up/Shutting Down") and connect the
page 53). In [Main] menu, set
8
(To next page)