Panasonic Toughbook CF-28 Series Reference Manual page 20

Standby/Hibernation Functions
Windows 98
When both [Turn off monitor] (in [Control Panel] - [Power Management] - [Power
Schemes]) and [Screen Saver] (in [Control Panel] - [Display] - [Screen Saver]) are
set, there are cases operations cannot resume in a normal manner from the standby
or hibernation mode.
When the screensaver setting is active, do not enter either the standby or hibernation
mode while the [MS-DOS Prompt] is being displayed. There are cases operations
cannot resume in a normal manner.
When the computer resumes from the standby or hibernation mode when MS-DOS
is running, the screen may become completely black. In such cases, press
Alt + Tab .
When inserting one more CardBus type card with one already inserted, after enter-
ing either the standby or hibernation mode, the computer may not function properly.
If you are using a PC Card, note that some cards may cease to function if the standby
or hibernation function is used. When this occurs, restart the computer.
When [Hibernation] is not displayed in [Power Switch] of the [Power] menu in the
Setup Utility, the hibernation specific partition on the hard disk is not available. Rein-
stall the OS to create a partition by using the Product Recovery CD-ROM.
Windows NT
Confirm that Phoenix APM 2.0 for Windows NT
time to be normally displayed with the standby or hibernation function. (If [APM 2.0
for NT] is displayed in [Control Panel], this means that the program is installed.)
Do not enter the standby or hibernation mode before logging on. The computer will
no longer generate a sound and will not function properly.
When [Hibernation] is not displayed in [Power Switch] of the [Power] menu in the
Setup Utility, the hibernation specific partition on the hard disk is not secured. Rein-
stall the OS to secure a partition by using the Product Recovery CD-ROM.
® is installed, in order for the date and
20