(Advanced) - Panasonic Toughbook CF-28 Series Reference Manual

Dealing with Problems
Shutting Down
Unable to shut down Win-
dows
Battery Indicator
The red indicator lights.
Repeated beeping sound
while the computer is in
use.
The red indicator blinks
The orange indicator
blinks
Touchscreen
Unable to input by touch-
ing the display
Touch Pad
Unable to input using the
touch pad
Character Input
Only capital letters are be-
ing input
How to input European
characters (ß, à, ç), sym-
bols or Euro Currency
Symbol is unclear
Setup Utility
[Enter Password] is dis-
played
[Advanced] menu can not
be registered
All or some items in [Se-
curity] menu can not be
registered
F9 does not work
Do not shut down Windows during music playback.
Windows 98 Windows 2000
If a USB device is connected, try removing it.
The battery level is low. Save your data and power off your computer.
After connecting the AC adaptor or replacing the battery pack with a fully charged
one, turn your computer on.
The battery pack or recharging function may be defective. Quickly remove the
battery pack and disconnect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support.
Unable to charge because of an improper temperature range. (
tions")
Has the Setup Utility been used to set [Touchscreen] to [Enable]? (
When mouse drivers are installed (e.g., Intellimouse), the touchscreen is unable to
be used.
Has the touchscreen driver been properly installed?
It is necessary to perform [Calibration] to point correctly with your finger or the
stylus included with the computer
Has the Setup Utility been used to set [Touch Pad] to [Enable]? (
When mouse drivers are installed (e.g., Intellimouse), the touch pad is unable to
be used.
Has the touchpad driver been properly installed?
If CapsLock is on, the Caps Lock function is ON. To switch it off, press
Caps Lock .
Windows 98 Windows 2000
Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map]. The
Character Map will be displayed. Point to the desired font name and select it.
Windows NT
Select [Start] - [Programs] - [Accessories] - [Character Map]. The Character Map will
be displayed. Point to the desired font name and select it.
Enter the User Password or Supervisor Password. If you have forgotten it, contact
Panasonic Technical Support.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.
Restart the Setup Utility with the Supervisor Password.

(Advanced)

66
"Precau-
page 54)
page 54)